1, the belt adjustment
2, inspection and maintenance
3, written content daily maintenance should include:
Walking without noise, the sensor is clean, automatic door switch door to walk the track is smooth, with overall control function is normal, whether the door is too large to see whether to continue to use the belt, check the belt groove depth is adequate, check the belt the screws are tight, check for excessive wear wheel drive, check the sensor angle is normal, check the front and rear brake plate worthy of use, a connector for loose connections in these areas.
4, automatic doors Fault and Maintenance
When the automatic door operation is abnormal you turn off the power for a few seconds, (mainly to allow the capacitor to release it, the controller reset) after the power supply through a try.